100L Powder Stainless Steel Storage Tank （Feed Hopper）

1. 320# mirror polishing on the inner surface of the silo, smooth discharge of powder.

 2. Corner arc transition is easy to clean, the bottom of the conical design of fast discharge.

 3. Fixed, installation without foundation embedded parts (the bin can be placed on solid ground), the foot of the bottom plate design can be adjusted to adjust the level of the tank and vertical adjustment seat.

 4. High-pressure cleaning (or built-in movable 360°rotating spray ball cleaning) to keep the tank clean.

 5. Quick-opening sealing manhole is set on the top of the silo, which is convenient to open and close.

 6. The sealing structure of the silo body makes the powder not damp and avoids the pollution of dust dispersion.

 7. Eccentric inclined discharge port (asymmetric) design, the powder into the bin side of the downstream receiving groove docking convenience.

 8. Configuration of vibrator, arch elimination plugging to help flow, break the powder bridging, sticking wall phenomenon.

1. Volume of feeding silo/powder storage tank: 50L, 100L, 200L, 300L, 400L, 500L, 600L, 800L, 1000L, 1500L, 1800L, 2000L, 5000L, 10m⊃3; and other series of specifications can be customized.

 2. Tank material: stainless steel SUS304 or 316L for selection (thickness: customized according to the use of requirements).

 3. Surface treatment inside the tank: mirror polishing (or according to the use of requirements).

 4. Outer surface treatment of tank body: 2B original color matte, frosted brushed surface, mirror surface.

 5. Users need to provide the angle of repose (also known as angle of repose) of the powder powder.

 6. Equipment components: manhole, sight glass, respirator, vacuum discharger, discharge valve, load cell, etc. as required.

 7. Arch-breaking and flow-assisting vibrators: pneumatic vibrators, electric vibrators, etc. (according to the need to determine whether or not the optional).

 8. Focus: according to the characteristics of the powder, silo hopper conditions and requirements for the use of design and manufacture.