Home / Products / Mixing Equipment / 5L Double Planetary Vacuum Power Mixer


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

5L Double Planetary Vacuum Power Mixer

The mixing blade of the double-planet mixer rotates while rotating, so that the materials in the tank circulate up and down and around, so that the mixing (mixing) effect can be achieved in a very short time. The inner wall of the tank is finished by a large vertical lathe, and then polished automatically by a large polishing machine to ensure that the movable scraper on the planet box will completely scrape off the material on the inner wall of the tank when it is rotated. This machine is especially suitable for material dissolving, mixing, mixing and reaction process from powder to high viscosity and high density. Widely used in batteries, organic silicone, ink, dyes, adhesives, high viscosity coatings and other chemical products.
  • 5L

Product Introduction

   The planetary power mixer is a new all-powerful machine, which combines the principle of traditional double planet mixer and high speed dispersion machine, and has been widely used in many fields.
   For the characteristics of high solid content and large viscosity of power battery slurry, our company has developed an enhanced power mixer with higher speed and greater torque on the basis of the proto-planetary power mixer. In the design process, fully consider the speed of the agitator, stirring power, dispersion linear speed, suspension grade, liquid flow pattern and the distribution of turbulence intensity in the barrel and other factors, the highest high-speed dispersion linear speed can reach 17m/s±1, the enhanced twist frame can handle any high viscosity battery slurry. The new mixing method - the twist frame rotates clockwise and turns counterclockwise to ensure that the mixing has no dead Angle and no "climbing" phenomenon. In terms of sealing, two sets of mechanical seals plus soft and static seals ensure vacuum - in theory, the sealing performance is enhanced by 30%. The Pt100 temperature sensor is in direct contact with the material, the measurement is more accurate, the reaction speed is faster, and the error is only between ±0.5ºC. This machine is composed of base, beam, column, seal cover, cylinder, transmission and electric control system.

Equipment Configuration

NameType specificationBrand origin
MotorLow speed 2.2KW-4 level, 1 set; High speed motor 2.2KW-2 level, 1 setChina
Converter2.2KW, 2 setsVEICHI
Touch Screen                    7 inch touch screen, touch screen can run normally, according to actual needs can also omit some steps to runVEICHI
PLCBy Design RequirementsVEICHI
Platinum ThermistorMaterial: stainless steel; Measuring temperature: -50 degrees to 280 degrees; Thermal reaction time: 0.3s; measuring accuracy:1°HTC
BearingBy Design RequirementsGermany FAG/HRB
Linear GuidewayHGW20CA, Class C accuracyHao Chen
Framework Oil SealFluoroplastic skeleton oil sealNAK/YSDA
Electrical Apparatus ElementLow-voltage electrical componentsSchneider Electric
ValveAccording to the drawingANIX
Mechanical SealTwo sets of mechanical sealsChesterton
GearUsing 20CrMnTi vacuum treatment, tooth surface carburizing hardening processing precision grinding, using bevel gear transmissionOWT
Lubricating GreaseHigh speed bearing special grease temperature 600 degreesBester
Vacuum PumpRotary vane type, the displacement is about 2L/S

Product Specifications

vacuum degree-0.098Mpa  Vacuum pressure holding: no less than -0.085Mpa for static 2 hours
StructureCantilever type
RPM r/minRevolution: 0~53r/min  Rotation: 0~106r/min(frequency control of motor speed);  
High speed: 0~6000r/min(frequency control of motor speed), meet line speed requirements.
Low Speed ShaftTwo axis twist. Framework Oil Seal: Hao Chen
High Speed ShaftSingle high speed shaft with two Φ50 dispersion discs on the shaft
Lifting ModeScrew lift: 0.25KW
Lifting Height220mm
Temperature Measurement MethodBarrel wall temperature measurement
Tank Body PositioningThe arc plate is used to set the block, and the kettle cover is provided with a flange structure to ensure the center positioning
Total Power (KW)5kw
Power SupplyAC: 3*380V,50HZ
Length: 1200 Width: 800 Heigth: 1500   (mm)
Weight  (kg)About 415kg

Dimension parameter

Tank Size (mm)
(Inner diameter * Internal height)
Volume (L)7.8L  Effective volume: 5L
Design Pressure
Inner tank: -0.098Mpa  Jacketed: 0.4Mpa
Design Temperature (°C)-10~+200°C
Tank Body Thickness(mm)Inner tank: δ4mm (Measured thickness after processing)  Jacketed: δ3mm.
Temperature control formTank body, tank bottom with jacket, increase the cooling or heating area
Moving MethodManual operation


Related Products

The shell and tube heat exchanger is kind of heat exchanger that is most widely applied for chemical and alcohol production. It is mainly composed of the shell, tube sheet, heat exchanging tube, sealing head, baffle plate, etc. It can be made of or dinary carbon steel, red copper or stainless steel, During the heat exchange, a king of fluid enters from the tube connection of the sealing head, flows in the tube and exits from the other tube connection of the sealing head, which is called tube pass. Another kind of fluid enters from the tube connection of the shell and exits from the other tube connection of the shell, which is called shell pass.
The company was founded in 2004 with a registered capital of 10million yuan.
Contact Us
  104,(Factory No.1) No.2 Shiling Road, Dongchong Town , Nansha District, Guangzhou City , Guangdong Province , China
  +86-18922465046


Quick Links

© 2022 Li&Li merchanical(GZ) corporation Co,.Ltd.  Sitemap/Support By Leadong